Description
Specs
| Catalog Number | CDRXL050744 |
|---|---|
| Enclosure | XPFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | CLI GP C,D |
| XP Division | Division I |
| Agency Approvals | UL CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 10.600 A @ 115.0 V 5.300 A @ 208.0 V 5.300 A @ 230.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 68.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 5.3 a |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3528L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 15.16 IN |
| Power Factor | 70 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 35-0000-0283 |
|---|---|
| CAT.NO. | CDRXL050744 |
| HP | .75 |
| VOLTS | 115/230 |
| AMPS | 10.6/5.3 |
| RPM | 1725 |
| HERTZ | 60 |
| SER.F. | 1.00 |
| FRAME | 56C |
| RATING | 40C AMB-CONT |
| USABLE AT 208V | N/A |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.716 Ohms A Ph / 1.61 Ohms B Ph |
| Temp. Rise @ Rated Load | 59° C |
| Start Configuration | DOL |
| Break-Down Torque | 6.57 LB-FT |
| Pull-Up Torque | 5.28 LB-FT |
| Locked-Rotor Torque | 7.11 LB-FT |
| Starting Current | 71.5 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 18.0 | 33.0 | 47.0 | 57.0 | 66.0 | 72.0 | 77.0 | 0.0 | ||
| Efficiency | 0.0 | 44.6 | 59.8 | 67.1 | 70.0 | 71.3 | 70.7 | 0.0 | ||
| Speed (RPM) | 1,796 | 1,785 | 1,773 | 1,760 | 1,746 | 1,729 | 1,710 | 0 | ||
| Line Amps | 8.25 | 8.38 | 8.81 | 9.54 | 10.50 | 11.70 | 13.10 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|---|
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
