Description
Specs
| Catalog Number | CDRXL050544 |
|---|---|
| Enclosure | XPFC |
| Frame | 56C |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .500 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | CLI GP C,D |
| XP Division | Division I |
| Agency Approvals | UL CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.500 A @ 208.0 V 3.700 A @ 230.0 V 7.400 A @ 115.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 68.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.7 a |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| IP Rating | NONE |
| KVA Code | M |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Termination | Flying Leads |
| Motor Type | 3520L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 14.28 IN |
| Power Factor | 65 |
| Product Family | General Purpose |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.15 |
| Shaft Diameter | 0.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 35-0000-0299 |
|---|---|
| CAT.NO. | CDRXL050544 |
| HP | .5 |
| VOLTS | 115/230 |
| AMPS | 7.4/3.7 |
| RPM | 1725 |
| HERTZ | 60 |
| SER.F. | 1.15 |
| FRAME | 56C |
| RATING | 40C AMB-CONT |
| USABLE AT 208V | N/A |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 1.06 Ohms A Ph / 2.39 Ohms B Ph |
| Temp. Rise @ Rated Load | 67° C |
| Temp. Rise @ S.F. Load | 74° C |
| Start Configuration | DOL |
| Break-Down Torque | 4.62 LB-FT |
| Pull-Up Torque | 3.69 LB-FT |
| Locked-Rotor Torque | 5.49 LB-FT |
| Starting Current | 45.2 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 20.0 | 34.0 | 46.0 | 56.0 | 65.0 | 72.0 | 76.0 | 69.0 | ||
| Efficiency | 0.0 | 41.5 | 57.1 | 64.8 | 67.9 | 69.2 | 68.9 | 68.7 | ||
| Speed (RPM) | 1,798 | 1,783 | 1,772 | 1,760 | 1,746 | 1,731 | 1,715 | 1,737 | ||
| Line Amps | 5.78 | 5.90 | 6.18 | 6.70 | 7.38 | 8.20 | 9.22 | 7.87 |
Parts
| TAG-INSTAL-MAINT no wire (2100bx)4/22 | |
| 35FH4005A01SP | IEC FH NO GREASER W/PRIMED |
| 35FN3002A05SP | EXFN, PLASTIC, 6.376 OD, .638 ID |
| EC1189A02SP | 61B2D120189NNBA ELEC CAP, 189-227MFD, 12 |
