Description
Specs
| Catalog Number | CDRX25224T-5 |
|---|---|
| Enclosure | XPFC |
| Frame | 256TC |
| Frame Material | Iron |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 20.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 575.0 V @ 60 HZ |
| XP Class and Group | CLI GP C,D |
| XP Division | Division I |
| Agency Approvals | UL CSA EEV |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Constant Torque Speed Range | 6 |
| Current @ Voltage | 17.500 A @ 575.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 91.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 17.5 a |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Inverter Duty |
| IP Rating | NONE |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Max Speed | 5400 rpm |
| Motor Lead Termination | Flying Leads |
| Motor Type | 0950M |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 26.00 IN |
| Power Factor | 91 |
| Product Family | Hazardous Location Motor |
| Pulley Face Code | C-Face |
| Rodent Screen | None |
| RoHS Status | ROHS NON-COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 1.625 IN |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Speed | 3530 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | Normally Closed Thermostat |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
| XP Temp Code | T3C |
Drawings
Nameplate
| SPEC. | 09-0000-1599 |
|---|---|
| CAT.NO. | CDRX25224T-5 |
| HP | 20 |
| VOLTS | 575 |
| AMPS | 17.5 |
| RPM | 3530 |
| HZ | 60 |
| SER.F. | 1.00 |
| FRAME | 256TC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.647 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 53° C |
| Temp. Rise @ S.F. Load | 67° C |
| Start Configuration | DOL |
| Break-Down Torque | 102 LB-FT |
| Pull-Up Torque | 49.5 LB-FT |
| Locked-Rotor Torque | 57.7 LB-FT |
| Starting Current | 141 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 10.0 | 69.0 | 86.0 | 91.0 | 92.0 | 92.0 | 92.0 | 0.0 | ||
| Efficiency | 0.0 | 88.9 | 92.2 | 93.1 | 92.6 | 91.8 | 90.9 | 0.0 | ||
| Speed (RPM) | 3,599 | 3,581 | 3,564 | 3,546 | 3,528 | 3,507 | 3,485 | 0 | ||
| Line Amps | 4.34 | 6.24 | 9.52 | 13.40 | 17.50 | 21.90 | 26.60 | 0.00 |
Parts
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
|---|
