Description
Specs
| Armature Voltage | 24 V |
|---|---|
| Base Speed | 1800 rpm |
| Enclosure | TEFC |
| Frame | 56C |
| Frame Material | Steel |
| Output Power | 1.000 HP |
| XP Class and Group | None |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Armature Current | 40.9 a |
| Armature Inertia | 12.052 lb-ft2 |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Feedback Device | NO FEEDBACK |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Lifting Lugs | No Lifting Lugs |
| Motor Lead Exit | SPECIAL (OLD) |
| Motor Lead Termination | Ring Terminals |
| Motor Lead Quantity/Wire Size | 2 @ 10 AWG |
| Mounting Arrangement | F3 |
| Overall Length | 15.89 IN |
| Product Family | General Purpose |
| Pulley End Bearing Type | Sealed Bearing |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Motor Standards | NEMA |
| XP Division | Not Applicable |
Drawings
Nameplate
| CAT.NO. | CDP3445-V24 |
|---|---|
| SPEC. | 34-7074Z619 |
| HP | 1 |
| RPM | 1800 |
| FRAME | 56C |
| ARM V | 24 |
| INSUL | F |
| DUTY | CONT |
| BRG/DE | 6203 |
| BRUSHES | 2/BP5112AU01 |
Performance
| Armature Resistance | 0.059 ohms |
|---|---|
| Armature Inductance | 0.292 mH |
| Armature Inertia | 12.0522 LI² |
| Rated Load | Load Point | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
|---|---|---|---|---|---|---|---|---|---|
| Armature Amps | 2.45 | 14.54 | 22.8 | 31.4 | 38.3 | 45.5 | 53.4 | ||
| RPM | 1926 | 1844 | 1801 | 1730 | 1669 | 1603 | 1560 | ||
| Torque | 0 | 0.73 | 1.46 | 2.19 | 2.92 | 3.65 | 4.38 |
Parts
| EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ | |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
