Description
Specs
| Catalog Number | AOM25904T |
|---|---|
| Enclosure | TEAO |
| Frame | 254T |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Three Phase |
| Output @ Frequency | 5.000 HP @ 60 HZ |
| Phase | 3 |
| Synchronous Speed @ Frequency | 900 RPM @ 60 HZ |
| Voltage @ Frequency | 460.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | CSA UR |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 18.600 A @ 208.0 V 9.200 A @ 460.0 V 18.400 A @ 230.0 V |
| Design Code | A |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 84.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 9.2 a |
| Front Face Code | Standard |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | F |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | Standard Lifting Lugs |
| Locked Bearing Indicator | Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 9 @ 12 AWG |
| Motor Type | 3936M |
| Mounting Arrangement | F1 |
| Number of Poles | 8 |
| Overall Length | 19.63 IN |
| Power Factor | 60 |
| Product Family | General Purpose |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.15 |
| Shaft Diameter | 1.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 885 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | None |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | AOM25904T |
|---|---|
| SPEC. | 39J95Z42 |
| HP | 5 AIR OVER |
| VOLTS | 230/460 |
| AMP | 18.4/9.2 |
| RPM | 885 |
| FRAME | 254T |
| SER.F. | 1.15 |
| NEMA-NOM-EFF | 84 |
| RATING | 40C AMB-CONT |
| DE | 6309 |
| ENCL | TEAO |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 2.02 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 63° C |
| Temp. Rise @ S.F. Load | 77° C |
| Start Configuration | DOL |
| Break-Down Torque | 68.97 LB-FT |
| Pull-Up Torque | 42.46 LB-FT |
| Locked-Rotor Torque | 62.1 LB-FT |
| Starting Current | 42.25 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 7.0 | 28.0 | 42.0 | 54.0 | 60.0 | 63.0 | 67.0 | 62.0 | ||
| Efficiency | 0.0 | 73.0 | 82.9 | 84.5 | 85.3 | 83.9 | 82.3 | 84.5 | ||
| Speed (RPM) | 899 | 896 | 893 | 890 | 886 | 880 | 877 | 882 | ||
| Line Amps | 5.53 | 5.93 | 6.83 | 7.83 | 9.19 | 11.05 | 12.78 | 10.30 |
Parts
| 09CB3501SP | CONDUIT BOX LID FOR 09CB3001 & 09CB3002 |
|---|---|
| 09GS1013SP | GS FOR 09CB3501, 12CB1500 & 12CB1503 LID |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| 51XW2520A12 | .25-20 X .75, TAPTITE II, HEX WSHR SLTD |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
