Description
Specs
| Catalog Number | ANFL3501M |
|---|---|
| Enclosure | TEFC |
| Frame | 48YZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .330 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | No Mounting |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 3.000 A @ 230.0 V 3.600 A @ 208.0 V 6.000 A @ 115.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 60.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 3.0 a |
| Front Face Code | Standard |
| Front Shaft Indicator | Multiple Flats |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | L |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Ko Box |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 7 @ 18 AWG |
| Motor Type | 3414L |
| Mounting Arrangement | F1 |
| Number of Poles | 4 |
| Overall Length | 12.44 IN |
| Power Factor | 60 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Other |
| Pulley Shaft Indicator | Standard |
| Rodent Screen | None |
| Service Factor | 1.35 |
| Shaft Diameter | 0.500 IN |
| Shaft Extension Location | Double Shaft |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible |
| Shaft Slinger Indicator | No Slinger |
| Speed | 1725 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Manual Thermal Overload |
| Winding Thermal 1 Location | SK |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | ANFL3501M |
|---|---|
| SPEC. | 34H317-5598 |
| HP | .33 |
| VOLTS | 115/230 |
| AMP | 6/3 |
| RPM | 1725 |
| FRAME | 48YZ |
| SER.F. | 1.35 |
| NEMA-NOM-EFF | 60 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEFC |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 6.32 Ohms A Ph / 4.93 Ohms B Ph |
| Temp. Rise @ Rated Load | 59° C |
| Temp. Rise @ S.F. Load | 73° C |
| Start Configuration | DOL |
| Break-Down Torque | 2.95 LB-FT |
| Pull-Up Torque | 2.55 LB-FT |
| Locked-Rotor Torque | 3.6 LB-FT |
| Starting Current | 13 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 22.0 | 31.0 | 41.0 | 52.0 | 60.0 | 67.0 | 73.0 | 71.0 | ||
| Efficiency | 0.0 | 33.0 | 41.0 | 52.0 | 60.0 | 61.5 | 61.5 | 61.5 | ||
| Speed (RPM) | 1,795 | 1,780 | 1,760 | 1,745 | 1,725 | 1,705 | 1,680 | 1,690 | ||
| Line Amps | 2.60 | 2.60 | 2.70 | 2.80 | 3.00 | 3.30 | 3.70 | 3.40 |
Parts
| TPMRG57BASP | THERMAL 1PH 0.75 MAN 105C |
|---|---|
| EC1189A02SP | 61B2D120189NNBA ELEC CAP, 189-227MFD, 12 |
| 34GS1013SP | GASKET,CONDUIT BOX LEXIDE |
| RM1014A01SP | BUTYL RUB.THRM COV. (MENA) |
| 34CB4800SP | CAPACITOR COVER, STAMPED PRIMED |
| 34GS3000SP | GASKET, CAPACITOR BOX |
| 34FN3002A01SP | EXTERNAL FAN, PLASTIC, .637/.639 HUB W/ |
| 34FH4002A03SP | IEC FH NO GREASER W/.88 DIA SHAFT HOLE, |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
