Description
Specs
| Catalog Number | AFL3524A |
|---|---|
| Enclosure | TEAO |
| Frame | 145TZ |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Cap Run |
| Output @ Frequency | 3.000 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 15.000 A @ 230.0 V |
| Design Code | - |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 15.0 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | H |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Terminal Panel Or Lead Hole |
| Motor Lead Termination | Flying Leads |
| Motor Lead Quantity/Wire Size | 2 @ 14 AWG, A PH |
| Motor Type | 3535LC |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 13.61 IN |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Ball |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Tapped & Key |
| Rodent Screen | None |
| RoHS Status | ROHS COMPLIANT |
| Service Factor | 1.00 |
| Shaft Diameter | 0.875 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible: Connected Standard |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | AFL3524A |
|---|---|
| SPEC. | 35T906Y039 |
| HP | 3 AIR OVER |
| VOLTS | 230 |
| AMP | 15 |
| RPM | 3450 |
| FRAME | 145TZ |
| SER.F. | 1.00 |
| RATING | 40C AMB-CONT |
| DE | 6205 |
| ENCL | TEAO |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.577 Ohms A Ph / 2.53 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 14.7 LB-FT |
| Pull-Up Torque | 11 LB-FT |
| Locked-Rotor Torque | 13.6 LB-FT |
| Starting Current | 92 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 29.0 | 47.0 | 64.0 | 75.0 | 83.0 | 86.0 | 87.0 | 0.0 | ||
| Efficiency | 0.0 | 55.0 | 70.0 | 75.0 | 78.0 | 78.0 | 77.0 | 0.0 | ||
| Speed (RPM) | 3,590 | 3,560 | 3,555 | 3,520 | 3,500 | 3,490 | 3,465 | 0 | ||
| Line Amps | 9.00 | 9.50 | 11.00 | 13.00 | 15.00 | 18.00 | 21.50 | 0.00 |
Parts
| OC3012F12SP | CYL OIL CAP 12MFD/370V |
|---|---|
| EC1216C06SP | ELEC CAP, 216-259 MFD, 250V, 2.06D X 4. |
| 35EP3102A02SP | FR ENDPLATE, MACH |
| 35CB4500SP | TERMINAL BOX LID STAMPED |
