Description
Specs
| Catalog Number | AFL3520A |
|---|---|
| Enclosure | TEAO |
| Frame | 56Z |
| Frame Material | Steel |
| Frequency | 60.00 Hz |
| Motor Letter Type | Cap Start, Induction Run |
| Output @ Frequency | .750 HP @ 60 HZ |
| Phase | 1 |
| Synchronous Speed @ Frequency | 3600 RPM @ 60 HZ |
| Voltage @ Frequency | 115.0 V @ 60 HZ 230.0 V @ 60 HZ |
| XP Class and Group | None |
| XP Division | Not Applicable |
| Agency Approvals | UR CSA |
| Ambient Temperature | 40 °C |
| Auxillary Box | No Auxillary Box |
| Auxillary Box Lead Termination | None |
| Base Indicator | Rigid |
| Bearing Grease Type | Polyrex EM (-20F +300F) |
| Blower | None |
| Current @ Voltage | 11.000 A @ 115.0 V 5.500 A @ 230.0 V |
| Design Code | N |
| Drip Cover | No Drip Cover |
| Duty Rating | CONT |
| Efficiency @ 100% Load | 71.0 % |
| Electrically Isolated Bearing | Not Electrically Isolated |
| Feedback Device | NO FEEDBACK |
| High Voltage Full Load Amps | 5.5 a |
| Front Face Code | Terminal Panel |
| Front Shaft Indicator | None |
| Heater Indicator | No Heater |
| Insulation Class | B |
| Inverter Code | Not Inverter |
| KVA Code | J |
| Lifting Lugs | No Lifting Lugs |
| Locked Bearing Indicator | No Locked Bearing |
| Motor Lead Exit | Lead Hole |
| Motor Lead Termination | Cord And Plug |
| Motor Lead Quantity/Wire Size | 6 @ 18 AWG |
| Motor Type | 3420L |
| Mounting Arrangement | F1 |
| Number of Poles | 2 |
| Overall Length | 11.59 IN |
| Power Factor | 68 |
| Product Family | General Purpose |
| Product Type | FARM DUTY |
| Pulley End Bearing Type | Sealed Bearing |
| Pulley Face Code | Standard |
| Pulley Shaft Indicator | Tapped & Key |
| Rodent Screen | None |
| Service Factor | 1.00 |
| Shaft Diameter | 0.625 IN |
| Shaft Extension Location | Pulley End |
| Shaft Ground Indicator | No Shaft Grounding |
| Shaft Rotation | Reversible: Connected Standard |
| Shaft Slinger Indicator | No Slinger |
| Speed | 3450 rpm |
| Speed Code | Single Speed |
| Motor Standards | NEMA |
| Starting Method | Direct on line |
| Thermal Device - Bearing | None |
| Thermal Device - Winding | None |
| Vibration Sensor Indicator | No Vibration Sensor |
| Winding Thermal 1 | Automatic Thermal Overload |
| Winding Thermal 1 Location | SB |
| Winding Thermal 2 | None |
Drawings
Nameplate
| CAT.NO. | AFL3520A |
|---|---|
| SPEC. | 34K48-656 |
| HP | .75 |
| VOLTS | 115/230 |
| AMP | 11/5.5 |
| RPM | 3450 |
| FRAME | 56Z |
| SER.F. | 1.00 |
| NEMA-NOM-EFF | 71 |
| RATING | 40C AMB-CONT |
| DE | 6203 |
| ENCL | TEAO |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 3.18 Ohms A Ph / 2.53 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 2.88 LB-FT |
| Pull-Up Torque | 2.25 LB-FT |
| Locked-Rotor Torque | 3.25 LB-FT |
| Starting Current | 25 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 20.0 | 35.0 | 49.0 | 61.0 | 70.0 | 75.0 | 80.0 | 0.0 | ||
| Efficiency | 0.0 | 42.0 | 58.0 | 64.0 | 66.0 | 65.0 | 63.0 | 0.0 | ||
| Speed (RPM) | 3,590 | 3,557 | 3,522 | 3,485 | 3,440 | 3,399 | 3,320 | 0 | ||
| Line Amps | 4.07 | 4.16 | 4.30 | 4.70 | 5.40 | 5.90 | 7.00 | 0.00 |
Parts
| EC1270A02SP | ELEC CAP, 270-324 MFD, 125V, 1.48D X 3. |
|---|---|
| 34EP3204A01SP | FR ENDPLATE, MACH |
| MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |
| 34CB4800SP | CAPACITOR COVER, STAMPED PRIMED |
| 34GS3000SP | GASKET, CAPACITOR BOX |
| 34EP3102A02SP | FR/PU ENDPLATE, MACH |
| 34CB4501SP | TERMINAL BOX LID, STAMPED X (PLATED) |
