Description
Specs
Catalog Number | AEM3787-4 |
---|---|
Enclosure | TEFC |
Frame | 215 |
Frame Material | Iron |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 5.000 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 460.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | UR CSA |
Ambient Temperature | 65 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 6.700 A @ 460.0 V |
Design Code | B |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 90.2 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 6.7 a |
Front Face Code | Standard |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Inverter Ready |
KVA Code | J |
Lifting Lugs | Standard Lifting Lugs |
Locked Bearing Indicator | No Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 3 @ 14 AWG |
Motor Type | 0728M |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 18.07 IN |
Power Factor | 77 |
Product Family | Automotive (Not For DC) |
Pulley End Bearing Type | Ball |
Pulley Face Code | Standard |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
Service Factor | 1.00 |
Shaft Diameter | 1.125 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 1760 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | AEM3787-4 |
---|---|
SPEC. | 07G087Y968G1 |
VOLTS | 460 |
AMP | 6.7 |
RPM | 1760 |
FRAME | 213 |
SER.F. | 1.00 |
NEMA-NOM-EFF | 90.2 |
G.MIN.EFF | 88.5 |
RATING | 65C AMB-CONT |
LUBRICATION | POLYREX EM |
DE | 6307 |
ENCL | TEFC |
Performance
Full Load Torque | 0 LB-FT |
---|---|
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 2.14 Ohms A Ph / 0 Ohms B Ph |
Temp. Rise @ Rated Load | 38° C |
Start Configuration | DOL |
Break-Down Torque | 48.7 LB-FT |
Pull-Up Torque | 26.6 LB-FT |
Locked-Rotor Torque | 31.1 LB-FT |
Starting Current | 46.2 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 6.0 | 38.0 | 60.0 | 71.0 | 77.0 | 80.0 | 82.0 | 0.0 | ||
Efficiency | 0.0 | 83.8 | 89.5 | 90.4 | 90.2 | 89.5 | 88.6 | 0.0 | ||
Speed (RPM) | 1,798 | 1,792 | 1,783 | 1,774 | 1,763 | 1,753 | 1,742 | 0 | ||
Line Amps | 3.37 | 3.69 | 4.42 | 5.45 | 6.70 | 8.08 | 9.62 | 0.00 |
Parts
07GS1000SP | GASKET, CONDUIT BOX, .125 THICK BLACK NE |
---|---|
07FH4007SP | PRIMED |
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |