Description
Specs
Catalog Number | AEM3689-4 |
---|---|
Enclosure | TEFC |
Frame | 184 |
Frame Material | Iron |
Frequency | 60.00 Hz |
Motor Letter Type | Three Phase |
Output @ Frequency | 2.000 HP @ 60 HZ |
Phase | 3 |
Synchronous Speed @ Frequency | 1800 RPM @ 60 HZ |
Voltage @ Frequency | 460.0 V @ 60 HZ |
XP Class and Group | None |
XP Division | Not Applicable |
Agency Approvals | UR CSA |
Ambient Temperature | 65 °C |
Auxillary Box | No Auxillary Box |
Auxillary Box Lead Termination | None |
Base Indicator | Rigid |
Bearing Grease Type | Polyrex EM (-20F +300F) |
Blower | None |
Current @ Voltage | 2.700 A @ 460.0 V |
Design Code | B |
Drip Cover | No Drip Cover |
Duty Rating | CONT |
Efficiency @ 100% Load | 88.5 % |
Electrically Isolated Bearing | Not Electrically Isolated |
Feedback Device | NO FEEDBACK |
High Voltage Full Load Amps | 2.7 a |
Front Face Code | Standard |
Front Shaft Indicator | None |
Heater Indicator | No Heater |
Insulation Class | F |
Inverter Code | Inverter Ready |
IP Rating | NONE |
KVA Code | K |
Lifting Lugs | Standard Lifting Lugs |
Locked Bearing Indicator | No Locked Bearing |
Motor Lead Exit | Ko Box |
Motor Lead Termination | Flying Leads |
Motor Lead Quantity/Wire Size | 3 @ 16 AWG |
Motor Type | 0626M |
Mounting Arrangement | F1 |
Number of Poles | 4 |
Overall Length | 14.74 IN |
Power Factor | 77 |
Product Family | Automotive (Not For DC) |
Pulley End Bearing Type | Ball |
Pulley Face Code | Standard |
Pulley Shaft Indicator | Standard |
Rodent Screen | None |
RoHS Status | ROHS COMPLIANT |
Service Factor | 1.00 |
Shaft Diameter | 0.875 IN |
Shaft Extension Location | Pulley End |
Shaft Ground Indicator | No Shaft Grounding |
Shaft Rotation | Reversible |
Shaft Slinger Indicator | No Slinger |
Speed | 1760 rpm |
Speed Code | Single Speed |
Motor Standards | NEMA |
Starting Method | Direct on line |
Thermal Device - Bearing | None |
Thermal Device - Winding | None |
Vibration Sensor Indicator | No Vibration Sensor |
Winding Thermal 1 | None |
Winding Thermal 2 | None |
Drawings
Nameplate
CAT.NO. | AEM3689-4 |
---|---|
SPEC. | 06F062X252G1 |
VOLTS | 460 |
AMP | 2.7 |
RPM | 1760 |
FRAME | 184 |
SER.F. | 1.00 |
NEMA-NOM-EFF | 88.5 |
G.MIN.EFF | 84.0 |
RATING | 65C AMB-CONT |
LUBRICATION | POLYREX EM |
DE | 6206 |
ENCL | TEFC |
Performance
Full Load Torque | 0 LB-FT |
---|---|
No-Load Current | 0 A |
Line-Line Res. @ 25° C | 6.7414 Ohms A Ph / 0 Ohms B Ph |
Temp. Rise @ Rated Load | 24° C |
Start Configuration | DOL |
Break-Down Torque | 20.3 LB-FT |
Pull-Up Torque | 10.9 LB-FT |
Locked-Rotor Torque | 12.5 LB-FT |
Starting Current | 19.6 A |
Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
---|---|---|---|---|---|---|---|---|---|---|
Power Factor | 6.0 | 35.0 | 55.0 | 68.0 | 75.0 | 80.0 | 82.0 | 0.0 | ||
Efficiency | 0.0 | 81.8 | 88.0 | 89.3 | 89.2 | 88.5 | 87.2 | 0.0 | ||
Speed (RPM) | 1,799 | 1,790 | 1,781 | 1,772 | 1,761 | 1,750 | 1,737 | 0 | ||
Line Amps | 1.53 | 1.67 | 1.93 | 2.33 | 2.80 | 3.33 | 3.94 | 0.00 |
Parts
EXFN, PLASTIC, 5.25 OD, .912 ID | |
51XW2520A12 | SCREW, HEX SER SLT HD, ZN, 1/4-20 X .75 |
HA1005A03SP | SLINGER, OD 1.750, ID .938, 205 BRG |
MN416A01 | TAG-INSTAL-MAINT no wire (2100bx)4/22 |