Description
Specs
| Frequency | 60.00 Hz |
|---|---|
| Nameplate Output | .5 |
| Number of Poles | 4 |
| Phase | 1 |
| Product Style | GRINDER |
| Shaft Diameter | 0.625 IN |
| Speed | 1800 rpm |
| Voltage | 115 V 230 V |
| Wheel Bore Size | 0.6250 IN |
| Wheel Diameter | 7.0000 IN |
| Wheel Face | 1.0000 IN |
Drawings
Nameplate
| CAT.NO. | 7306D |
|---|---|
| HP | .5 |
| PHASE | 1 |
| HZ | 60 |
| SPEC. | G7-307-385 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 2.01 Ohms A Ph / 22.2 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 3.11 LB-FT |
| Pull-Up Torque | 0.228 LB-FT |
| Locked-Rotor Torque | 0.275 LB-FT |
| Starting Current | 19.71 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 58.0 | 83.0 | 91.0 | 94.0 | 95.0 | 95.0 | 95.0 | 0.0 | ||
| Efficiency | 0.0 | 54.9 | 69.7 | 75.3 | 76.7 | 75.1 | 72.0 | 0.0 | ||
| Speed (RPM) | 1,797 | 1,781 | 1,765 | 1,746 | 1,722 | 1,702 | 1,678 | 0 | ||
| Line Amps | 1.20 | 1.78 | 2.56 | 3.45 | 3.80 | 5.26 | 5.96 | 0.00 |
Parts
| OC3008F12SP | CYL OIL CAP 8MFD/370V |
|---|---|
| SP9000SP | 80600BJ A-H OR 1520237-2 TYCO;2PST,125/2 |
| RM1005A01SP | BUMPER- #2089 (R-R CO) |
| G7FH1800A01GSP | GRINDER GUARD, MACH |
| HA2040A01SP | SPACER,CRST(WELKER#824500 |
| XY6311A12SP | HEX NUT 5/8-11 |
| G6AP1008A01SP | TOOLREST, MACH/PRIMED |
| HA6064A01SP | PAINT/PRIME HA6064A01 |
| G6AP1008A01SP | TOOLREST, MACH/PRIMED |
| HA6064A01SP | PAINT/PRIME HA6064A01 |
| HA6094A01SP | CLAMP FOR SUPPORT ARM X PLATED |
| GA24 | WATER POT ASSY |
| GA25 | TOOL TRAY ASSY |
| MN903 | INSTR MANUAL FOR GRINDERS 9/03 |
