Description
Specs
| Frequency | 60.00 Hz |
|---|---|
| Nameplate Output | 1.5 |
| Number of Poles | 2 |
| Phase | 3 |
| Product Style | BELT SANDER |
| Speed | 3450 rpm |
| Voltage | 208 V 230 V 460 V |
Drawings
Nameplate
| CAT.NO. | 248-153TD |
|---|---|
| HP | 1.5 |
| PHASE | 3 |
| HZ | 60 |
| SPEC. | B2-5C |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 11.8 Ohms A Ph / 0 Ohms B Ph |
| Temp. Rise @ Rated Load | 63° C |
| Temp. Rise @ S.F. Load | 70° C |
| Start Configuration | DOL |
| Break-Down Torque | 9 LB-FT |
| Pull-Up Torque | 6.5 LB-FT |
| Locked-Rotor Torque | 7.2 LB-FT |
| Starting Current | 16 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 21.0 | 43.0 | 59.0 | 71.0 | 79.0 | 83.0 | 86.0 | 81.0 | |||||||||||
| Efficiency | 0.0 | 52.2 | 66.7 | 72.7 | 75.5 | 76.2 | 76.1 | 75.9 | |||||||||||
| Speed (RPM) | 3,595 | 3,558 | 3,528 | 3,496 | 3,461 | 3,424 | 3,382 | 3,439 | |||||||||||
| Line Amps | 1.40 | 1.60 | 1.80 | 2.10 | 2.40 | 2.80 | 3.20 | 2.64 |
Parts
| G8AP1003A01SP | TOOL REST |
|---|---|
| B2FH2806A01SP | CONTACT WHEEL GUARD |
| B2FH2801A01SP | GRINDER GUARD, MACH |
| B2AP3003A01SP | IDLER WHEEL -- BELT GRINDER |
| B2AP5001A01SP | CONTACT WHEEL ASSY WITH RUBBER THREAD |
| XY7510A12SP | 3/4-10 NUT R.H. HEX (NC) ZINC PLATED |
| AB248 | ABRASIVE BELT, 2" X 48", 80 GRIT,CERAMIC |
| B2FH2810A01SP | GUARD (HALF) MACHINED, USE W/B2FH2811A01 |
| B2FH2808A01SP | GUARD COVER, MACH |
| B2FH2809A01SP | GUARD COVER, MACH |
| MN902 | MANUAL FOR BELT GRINDERS |
