Description
Specs
| Frequency | 60.00 Hz |
|---|---|
| Nameplate Output | 1.5 |
| Number of Poles | 2 |
| Phase | 1 |
| Speed | 3450 rpm |
| Voltage | 115 V 230 V |
Drawings
Nameplate
| CAT.NO. | 248-151TD |
|---|---|
| HP | 1.5 |
| PHASE | 1 |
| HZ | 60 |
| SPEC. | B2-5A |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 1.26 Ohms A Ph / 1.23 Ohms B Ph |
| Temp. Rise @ Rated Load | 70° C |
| Temp. Rise @ S.F. Load | 84° C |
| Start Configuration | DOL |
| Break-Down Torque | 5.6 LB-FT |
| Pull-Up Torque | 5.2 LB-FT |
| Locked-Rotor Torque | 5.5 LB-FT |
| Starting Current | 42 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 22.0 | 47.0 | 64.0 | 73.0 | 80.0 | 84.0 | 86.0 | 82.0 | ||
| Efficiency | 0.0 | 51.9 | 65.3 | 68.4 | 71.2 | 70.6 | 68.4 | 70.8 | ||
| Speed (RPM) | 3,591 | 3,567 | 3,541 | 3,514 | 3,475 | 3,439 | 3,397 | 3,453 | ||
| Line Amps | 4.50 | 5.00 | 5.80 | 6.90 | 8.60 | 10.20 | 12.10 | 9.60 |
Parts
| G8AP1003A01SP | TOOL REST |
|---|---|
| B2FH2806A01SP | CONTACT WHEEL GUARD |
| B2FH2801A01SP | GRINDER GUARD, MACH |
| B2AP3003A01SP | IDLER WHEEL -- BELT GRINDER |
| B2AP5001A01SP | CONTACT WHEEL ASSY WITH RUBBER THREAD |
| XY7510A12SP | 3/4-10 NUT R.H. HEX (NC) ZINC PLATED |
| AB248 | ABRASIVE BELT, 2" X 48", 80 GRIT,CERAMIC |
| B2FH2810A01SP | GUARD (HALF) MACHINED, USE W/B2FH2811A01 |
| B2FH2808A01SP | GUARD COVER, MACH |
| B2FH2809A01SP | GUARD COVER, MACH |
| MN902 | MANUAL FOR BELT GRINDERS |
