Description
Specs
| Frequency | 50.00 Hz 60.00 Hz |
|---|---|
| Nameplate Output | 7.5 |
| Number of Poles | 4 |
| Phase | 3 |
| Product Style | GRINDER |
| Shaft Diameter | 1.250 IN |
| Speed | 1500 rpm 1800 rpm |
| Voltage | 575 V |
| Wheel Bore Size | 1.2500 IN |
| Wheel Diameter | 14.0000 IN |
| Wheel Face | 3.0000 IN |
Drawings
Nameplate
| CAT.NO. | 1409W |
|---|---|
| HP | 7.5 |
| PHASE | 3 |
| HZ | 50//60 |
| SPEC. | G14-116A-0120 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 3.79 Ohms A Ph / 0 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 71.2 LB-FT |
| Pull-Up Torque | 20 LB-FT |
| Locked-Rotor Torque | 39.8 LB-FT |
| Starting Current | 37.7 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 5.0 | 45.0 | 69.0 | 80.0 | 85.0 | 87.0 | 88.0 | 0.0 | |||||||||||
| Efficiency | 0.0 | 88.0 | 91.0 | 91.1 | 90.3 | 89.0 | 87.3 | 0.0 | |||||||||||
| Speed (RPM) | 1,500 | 1,493 | 1,485 | 1,478 | 1,469 | 1,460 | 1,449 | 0 | |||||||||||
| Line Amps | 3.14 | 3.52 | 4.50 | 5.80 | 7.34 | 9.07 | 11.00 | 0.00 |
Parts
| G2AP1002A01SP | TOOL REST, MACH (G) MACHINED 6 ON |
|---|---|
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| G2AP1002A01SP | TOOL REST, MACH (G) MACHINED 6 ON |
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| XZ2007A62SP | 1 1/4-7 NUT LH HEX (NC) |
| XZ2007A12SP | 1 1/4-7 NUT RH HX(NC)(F/S |
| GA9 | EYESHIELD ASSY |
| MN909 | EYESHIELD MTG INSTR. FOR GA9, GA10 & GA1 |
| MN903 | INSTR MANUAL FOR GRINDERS 9/03 |
