Description
Specs
| Frequency | 50.00 Hz 60.00 Hz |
|---|---|
| Nameplate Output | 5 |
| Number of Poles | 4 |
| Phase | 3 |
| Product Style | GRINDER |
| Shaft Diameter | 1.250 IN |
| Speed | 1500 rpm 1800 rpm |
| Voltage | 575 V |
| Wheel Bore Size | 1.2500 IN |
| Wheel Diameter | 14.0000 IN |
| Wheel Face | 3.0000 IN |
Drawings
Nameplate
| CAT.NO. | 1408W |
|---|---|
| HP | 5 |
| PHASE | 3 |
| HZ | 50//60 |
| SPEC. | G14-116D-0047 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 3.55 Ohms A Ph / 0 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 51.1 LB-FT |
| Pull-Up Torque | 23 LB-FT |
| Locked-Rotor Torque | 26.4 LB-FT |
| Starting Current | 31.3 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 13.0 | 54.0 | 74.0 | 83.0 | 87.0 | 89.0 | 90.0 | 0.0 | |||||||||||
| Efficiency | 0.0 | 77.4 | 85.2 | 87.4 | 87.8 | 87.5 | 86.7 | 0.0 | |||||||||||
| Speed (RPM) | 1,798 | 1,786 | 1,774 | 1,761 | 1,747 | 1,731 | 1,715 | 0 | |||||||||||
| Line Amps | 1.92 | 2.27 | 2.97 | 3.87 | 4.88 | 5.98 | 7.18 | 0.00 |
Parts
| TOOL REST, MACH (G) MACHINED 6 ON | |
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| G2AP1002A01SP | TOOL REST, MACH (G) MACHINED 6 ON |
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| XZ2007A62SP | 1 1/4-7 NUT LH HEX (NC) |
| XZ2007A12SP | 1 1/4-7 NUT RH HX(NC)(F/S |
| GA9 | EYESHIELD ASSY |
| MN909 | EYESHIELD MTG INSTR. FOR GA9, GA10 & GA1 |
| MN903 | INSTR MANUAL FOR GRINDERS 9/03 |
