Description
Specs
| Frequency | 50.00 Hz 60.00 Hz |
|---|---|
| Nameplate Output | 5 |
| Number of Poles | 4 |
| Phase | 3 |
| Product Style | GRINDER |
| Shaft Diameter | 1.250 IN |
| Speed | 1500 rpm 1800 rpm |
| Voltage | 208 V 230 V 460 V |
| Wheel Bore Size | 1.2500 IN |
| Wheel Diameter | 14.0000 IN |
| Wheel Face | 3.0000 IN |
Drawings
Nameplate
| CAT.NO. | 1406W |
|---|---|
| HP | 5 |
| PHASE | 3 |
| HZ | 50//60 |
| SPEC. | G14-116E-0119G1 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 2.06 Ohms A Ph / 0 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 53.78 LB-FT |
| Pull-Up Torque | 22.93 LB-FT |
| Locked-Rotor Torque | 31.17 LB-FT |
| Starting Current | 41.65 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 6.0 | 41.0 | 63.0 | 75.0 | 82.0 | 85.0 | 87.0 | 0.0 | ||
| Efficiency | 0.0 | 82.7 | 88.7 | 89.9 | 90.1 | 90.0 | 89.4 | 0.0 | ||
| Speed (RPM) | 1,799 | 1,791 | 1,784 | 1,776 | 1,768 | 1,759 | 1,749 | 0 | ||
| Line Amps | 3.16 | 3.49 | 4.18 | 5.18 | 6.35 | 7.63 | 9.02 | 0.00 |
Parts
| G2AP1002A01SP | TOOL REST, MACH (G) MACHINED 6 ON |
|---|---|
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| G2AP1002A01SP | TOOL REST, MACH (G) MACHINED 6 ON |
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| XZ2007A62SP | 1 1/4-7 NUT LH HEX (NC) |
| XZ2007A12SP | 1 1/4-7 NUT RH HX(NC)(F/S |
| GA9 | EYESHIELD ASSY |
| MN909 | EYESHIELD MTG INSTR. FOR GA9, GA10 & GA1 |
| MN903 | INSTR MANUAL FOR GRINDERS 9/03 |
