Description
Specs
| Frequency | 60.00 Hz |
|---|---|
| Nameplate Output | 2 |
| Number of Poles | 4 |
| Phase | 1 |
| Shaft Diameter | 1.250 IN |
| Speed | 1800 rpm |
| Voltage | 115 V 230 V |
Drawings
Nameplate
| CAT.NO. | 1217W |
|---|---|
| HP | 2 |
| PHASE | 1 |
| HZ | 60 |
| SPEC. | G12-119B-0002 |
Performance
| Full Load Torque | 0 LB-FT |
|---|---|
| No-Load Current | 0 A |
| Line-Line Res. @ 25° C | 0.997 Ohms A Ph / 0.665 Ohms B Ph |
| Start Configuration | DOL |
| Break-Down Torque | 14 LB-FT |
| Pull-Up Torque | 11.8 LB-FT |
| Locked-Rotor Torque | 14.2 LB-FT |
| Starting Current | 58.6 A |
| Rated Load | Rated Load | 0% | 25% | 50% | 75% | 100% | 125% | 150% | S.F. | |
|---|---|---|---|---|---|---|---|---|---|---|
| Power Factor | 25.0 | 49.0 | 64.0 | 73.0 | 79.0 | 82.0 | 86.0 | 0.0 | ||
| Efficiency | 0.0 | 50.6 | 64.5 | 68.3 | 68.7 | 66.4 | 64.6 | 0.0 | ||
| Speed (RPM) | 1,793 | 1,782 | 1,770 | 1,756 | 1,739 | 1,720 | 1,696 | 0 | ||
| Line Amps | 6.04 | 6.70 | 7.99 | 9.76 | 11.90 | 14.60 | 17.00 | 0.00 |
Parts
| EC1645A06SP | ELEC CAP, 645-774 MFD, 125V, 2.06D X 4. |
|---|---|
| G2AP1002A01SP | TOOL REST, MACH (G) MACHINED 6 ON |
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| G2AP1002A01SP | TOOL REST, MACH (G) MACHINED 6 ON |
| HA6049A01SP | SUPPORT, TOOL REST, MACH |
| XZ2007A62SP | 1 1/4-7 NUT LH HEX (NC) |
| XZ2007A12SP | 1 1/4-7 NUT RH HX(NC)(F/S |
| GA9 | EYESHIELD ASSY |
| MN909 | EYESHIELD MTG INSTR. FOR GA9, GA10 & GA1 |
| MN903 | INSTR MANUAL FOR GRINDERS 9/03 |
